Configuring Virtual Firewall Instances

Configuring Virtual Firewall

Follow these steps to configure Virtual Firewall Instances:

1. Access the Default Services in the main navigation menu.
2. Select "Virtual Firewall" located within the Networking section.
3. Turn on the switch at the top to make this service available as part of the default services. This action will enable all associated sections.
4. Move to the Availability section. Choose the availability zone from which you want to offer the service, then click "Save & Update."

5. Within the Billing section, two options are available: 

- Prorate on Entry

- Prorate on Exit

6. Virtual Firewall Instances can be provisioned to an approval-based system within the Provisioning section. This is done by activating the "Approval Required" switch, offering additional functionalities such as sending custom instructions to end-users upon approval and attaching up to five files, each up to 3 MB.

Further, the PRICING options include:

- Access the Compute section, select Availability Zone, and enable the compute pack for the desired collection available to end-users.

- Navigate to the Providers Section, choose the Availability Zone, and activate both providers—pfSense and Fortinet based on your requirement. Specify the descriptions and then establish the pricing accordingly.

- In the Root Disks section, select the availability zone and enable packs for the designated collection.

- Click on the IPv4 Addresses to enable the default IPv4 Address for VPC Networking and define the pricing.

Finally, return to Default Services and click on "PUBLISH DEFAULT CATALOGUE."